High speed angular contact ball bearing(71956C/71956AC)

• Brand: AUTO

• Packaging: Standard export packaging

• Supply Ability: 3000pcs/month

• Min. Order: 500 Bag/Bags

• Model No.: 71956C/71956AC

The angular contact ball bearings are used in pairs. During the installation process, some maintenance workers usually install according to their own previous installation methods. They don't know that this is very particular. The way of their installation is not correct, which will affect their service life. The...

High speed angular contact ball bearing(71952C/71952AC)

• Brand: AUTO

• Packaging: Standard export packaging

• Supply Ability: 3000pcs/month

• Min. Order: 500 Bag/Bags

• Model No.: 71952C/71952AC

Angular contact ball bearings can be divided into three types according to their contact angle. 1) 7000 C, the contact angle of =15 degrees, mainly used in large size precision bearings. 2) 7000 AC, the contact angle of =25 degrees, mainly used in precision spindle bearing. 3) 7000 B, the contact angle of =40 degrees,...

High speed angular contact ball bearing(7023C/7023AC)

• Brand: AUTO

• Packaging: Standard export packaging

• Supply Ability: 3000pcs/month

• Min. Order: 500 Bag/Bags

• Model No.: 7023C/7023AC

Angular contact bearing preload adjustment by grinding ring, change the bearing inner and outer ring spacer thickness difference to realize, consideration should be avoided in the new arrival of bearing ring needs to re grinding, not the original ring grinding processing, only in between the bearing and the bearing...

(32008)Single row tapered roller bearing

• Brand: AUTO

• Supply Ability: 5000ps/month

• Min. Order: 500 Bag/Bags

• Model No.: 32008

The grinding process of outer ring usually adopts the way of large end positioning, supporting external diameter, grinding external diameter (external grinding outside) and supporting outer diameter grinding external raceway (external grinding), so the accuracy of large end faces will affect the accuracy of other...

(32028)Single row tapered roller bearing

• Brand: AUTO

• Supply Ability: 5000ps/month

• Min. Order: 500 Bag/Bags

• Model No.: 32028

When designing the chamfering of tapered roller bearing rings, the assembly performance of tapered roller bearings, such as roughness and machining accuracy, should first be considered. Secondly, the difference between the limit value of the chamfering coordinate and the actual assembly should be considered....

(32032)Single row tapered roller bearing

• Brand: AUTO

• Supply Ability: 5000ps/month

• Min. Order: 500 Bag/Bags

• Model No.: 32032

The design of chamfering for small circular arc, large circular arc and oblique edge is discussed in detail, and the calculation method of machining coordinate size is given. Then, the formula for machining is deduced based on mathematical principle. The chamfering problem of the conical roller bearing ring assembly...

(RB2008)Cross cylindrical roller bearing

• Brand: AUTO

• Supply Ability: 1000pcs/month

• Min. Order: 5 Bag/Bags

• Model No.: RB2008

The inner structure of cross roller bearings is made of roller with 90 degrees perpendicular to each other. There are interval retainers or isolation blocks between rollers, which can prevent rollers from leaning or rolling between each other, effectively preventing the increase of rotational torque. In addition,...

(RB2508)Cross cylindrical roller bearing

• Brand: AUTO

• Supply Ability: 1000pcs/month

• Min. Order: 5 Bag/Bags

• Model No.: RB2508

At present, the application of cross roller bearings in CNC vertical lathe is still a small proportion. Most of CNC vertical lathe spindle structure applications still use the traditional structure, that is double row cylindrical roller bearing and plane bearing combination. Compared with traditional structure...

Single Row Deep Groove Ball Bearing (61924)

• Brand: AUTO

• Packaging: Standard export packaging

• Supply Ability: 12000pcs/month

• Min. Order: 500 Bag/Bags

• Model No.: 61924

At present, the vibration and noise detection of the bearing in China mainly adopts the vibration acceleration sensor and the vibration velocity sensor. The vibration acceleration sensor mainly detects the vibration of the bearing at higher frequency, while the bearing vibration speed is directly proportional to the...

(RB7013)Cross cylindrical roller bearing

• Brand: AUTO

• Supply Ability: 1000pcs/month

• Min. Order: 5 Bag/Bags

• Model No.: RB7013

The advantages of the application of the cross roller bearing in the numerical control vertical lathe. The application of cross roller in vertical CNC lathe spindle has gradually been recognized, the cross-sectional area of the roller with its special arrangement occupy relatively small, thus saving the raw materials...

(RB8016)Cross cylindrical roller bearing

• Brand: AUTO

• Supply Ability: 1000pcs/month

• Min. Order: 5 Bag/Bags

• Model No.: RB8016

Robot Bearing as the spindle of the lathe adopts cross roller bearings, it reduces the time of the lathe's establishment, small ball Bearing for robotand the center of the spindle of the CNC vertical lathe has also been reduced, but its performance has been greatly improved. In addition, because the roller is arranged...

(RB9016)Cross cylindrical roller bearing

• Brand: AUTO

• Supply Ability: 1000pcs/month

• Min. Order: 5 Bag/Bags

• Model No.: RB9016

The development of CNC vertical lathe is more and more strict with the spindle. The application from traditional bearing structure to cross roller bearing is not only the development of science and technology, but also the improvement of people's pursuit of things. Through the comparison of the two kinds of bearings,...

Single Row Deep Groove Ball Bearing (6322)

• Brand: AUTO

• Packaging: Standard export packaging

• Supply Ability: 12000pcs/month

• Min. Order: 500 Bag/Bags

• Model No.: 6322

When the measured bearing enters the material path of the machine from the assembly line, the horizontal bearing is adjusted to the erect state through the turn over device, and then the loading manipulator is sent to the detection station. The axial loading device can load the outer ring of the tested bearing, at the...

32256 Single row tapered roller bearing

• Brand: AUTO

• Supply Ability: 5000ps/month

• Min. Order: 500 Bag/Bags

• Model No.: 32256

First, the taper roller bearings installation: Taper Roller Bearing must be installed in a dry, clean environment. Care should be taken prior to installation to check the mating surfaces of the shaft and housing, the end faces of the shoulders, the quality of the grooves and connecting surfaces. All mating surfaces...

32960 Single row tapered roller bearing

• Brand: AUTO

• Supply Ability: 5000ps/month

• Min. Order: 500 Bag/Bags

• Model No.: 32960

When the interference is larger, the oil bath heating or sensor heating method can be used to install the heating temperature range of 80 ℃ -100 ℃, the maximum can not exceed 120 ℃. At the same time, the use of nuts or other appropriate method of fastening the bearing to prevent the taper roller bearings cooling...

32060 Single row tapered roller bearing

• Brand: AUTO

• Supply Ability: 5000ps/month

• Min. Order: 500 Bag/Bags

• Model No.: 32060

After installation, tapered roller bearing should be subjected to rotation test. First, it should be used on the rotating shaft or tapered roller bearing box. If there is no abnormality, tapered roller bearing should be powered at no-load and low-speed. Then, the rotation speed and load should be gradually increased...

30260 Single row tapered roller bearing

• Brand: AUTO

• Supply Ability: 5000ps/month

• Min. Order: 500 Bag/Bags

• Model No.: 30260

Third, the use of tapered roller bearing the environment: According to the use of parts and conditions of use and environmental conditions to choose size, precision, with appropriate tapered roller bearing is to ensure the bearing life and reliability of the premise. 1, the use of parts: tapered roller bearings for...

32964 Single row tapered roller bearing

• Brand: AUTO

• Supply Ability: 5000ps/month

• Min. Order: 500 Bag/Bags

• Model No.: 32964

Large cone angle bearing, post code plus B, taper angle between 25 ° ~ 29 °, it can withstand greater axial load. In addition, single row tapered roller bearings can be adjusted during the installation of the size of clearance. Tapered roller bearings are mainly subjected to radial-based diameter, axial joint load....

30264 Single row tapered roller bearing

• Brand: AUTO

• Supply Ability: 5000ps/month

• Min. Order: 500 Bag/Bags

• Model No.: 30264

Tapered roller bearing Bearing code:30264 Single row tapered roller bearing d=320 D=580 T=104 B=92 C=75 Luoyang Auto Bearing Co., Ltd. is located in the industrial park of Luoyang,which is one of the four great ancient capitals of China.Our company is the member of China Bearing Industry Association,cooperating with...

32968 Single row tapered roller bearing

• Brand: AUTO

• Supply Ability: 5000ps/month

• Min. Order: 500 Bag/Bags

• Model No.: 32968

When the interference is larger, the oil bath heating or sensor heating method can be used to install the heating temperature range of 80 ℃ -100 ℃, the maximum can not exceed 120 ℃. At the same time, the use of nuts or other appropriate method of fastening the tapered roller bearing to prevent the bearing cooling...

32068 Single row tapered roller bearing

• Brand: AUTO

• Supply Ability: 5000ps/month

• Min. Order: 500 Bag/Bags

• Model No.: 32068

If there is no abnormality, the bearing will be powered at no-load and low-speed operation. Then the rotation speed and load will be gradually increased depending on the operation condition. Noise, vibration and temperature rise , Found abnormal, should stop running and check. Operation test after normal delivery....

32072 Single row tapered roller bearing

• Brand: AUTO

• Supply Ability: 5000ps/month

• Min. Order: 500 Bag/Bags

• Model No.: 32072

The unreasonable design of the chamfering dimension of the cone roller bearing sleeve assembly seriously reduces the performance of the bearing assembly and prevents the bearing from working normally. In addition, in the process of tapered roller bearing assembly, tapered roller bearing clearance matching method,...

32076 Single row tapered roller bearing

• Brand: AUTO

• Supply Ability: 5000ps/month

• Min. Order: 500 Bag/Bags

• Model No.: 32076

The design status of chamfering Angle of bearing sleeve assembly of taper roller In China, the manufacturing technology of taper roller bearing is not very mature, and its specific design is not standardized. The rolling bearings taper roller bearing dimension overall plan and the rolling bearing tapered roller...

32980 Single row tapered roller bearing

• Brand: AUTO

• Supply Ability: 5000ps/month

• Min. Order: 500 Bag/Bags

• Model No.: 32980

In the design of taper roller bearing ring assembly chamfering, first of all, want to consider the assembly of tapered roller bearing its own performance such as roughness, machining accuracy, next want to consider the limit value of chamfering coordinates and the difference between the actual assembly. Therefore, the...