Choosing the right crusher is very important for the normal operation of the work. The biggest problem after the crusher starts to use is the daily maintenance. The maintenance will extend the life of the crusher and save the cost. Here I take everyone to know how to maintain the bearings of the crusher.
If the bearing wears little, just to repair its geometry, it can be turned on the lathe to bring the journal to the correct geometry and then reduce the bearing inner diameter accordingly. However, after several such treatments, if the journal size is reduced by 5% compared to the original, no turning is allowed, and the new shaft should be changed. No matter what equipment, just need good maintenance, good maintenance, and the service life will grow. You only need to maintain your crusher well, not only increase the service life, but also save you a lot of money. Many people's crushers have been used for a long time and are not well maintained until they are repaired, so the loss of machinery is great. Many people ask how to clean the crusher housing. This is a mechanical maintenance problem. The mine crusher is cleaned with clean gasoline or kerosene. The jaw crusher is always cleaned in this way. When purchasing the crusher. What the engineer will confess is that it will be cleaned once every minute after use, which will extend the life of the crusher.
