Angular contact ball bearing 3201

• Brand: AUTO

• Packaging: Standard export packaging

• Supply Ability: 3000pcs/month

• Min. Order: 500 Bag/Bags

• Model No.: 3201

Angular contact ball bearing Angular contact ball bearing introduction: Angular contact ball bearings can withstand both radial and axial loads. Can work at higher speeds. The greater the contact angle, the higher the axial load carrying capacity. High-precision and high-speed bearings usually take 15 degrees of...

Angular Contact Bearing 3200

• Brand: AUTO

• Packaging: Standard export packaging

• Supply Ability: 3000pcs/month

• Min. Order: 500 Bag/Bags

• Model No.: 3200

Double row Angle contact ball bearing is a new product developed by our company for steel, mine, plate and high-speed wire mill. In the process of development and trial production, the main problem is that the bearing clearance is not well controlled, can not meet the design requirements stably, and the fitting rate...

Cross Roller Bearing YRT580

• Brand: AUTO

• Packaging: Standard export packaging

• Supply Ability: 12000pcs/month

• Min. Order: 500 Bag/Bags

• Model No.: YRT580

Wind turbine wheel bearing manufacturing process, its lubrication, encapsulation and anticorrosive process is also the key to the manufacturing process, in the process of the wheel bearing lubrication, steering resistance moment is reduced, and extend the service life of wheel bearings, the use of grease lubrication...

Cross Roller Bearing YRT460

• Brand: AUTO

• Packaging: Standard export packaging

• Supply Ability: 12000pcs/month

• Min. Order: 500 Bag/Bags

• Model No.: YRT460

The manufacture and analysis of the rotor bearing of wind turbine Wind turbine wheel bearing manufacturing process, the basic process is the first rough turning to determine the diameter of the wheel bearing ring inside and outside, and do a good job, end face and check mouth without a ring gear and taper pin hole...

Cross Roller Bearing YRT395

• Brand: AUTO

• Packaging: Standard export packaging

• Supply Ability: 12000pcs/month

• Min. Order: 500 Bag/Bags

• Model No.: YRT395

Design and analysis of rotor bearing for wind turbine In the actual design process, the rotor bearing of wind turbine should be selected and analyzed first, and then implemented with the help of modern CAD technology. (1) selection of rotor bearings for wind turbines The rotary table bearing of wind turbine mainly has...

Cross Roller Bearing YRT325

• Brand: AUTO

• Packaging: Standard export packaging

• Supply Ability: 12000pcs/month

• Min. Order: 500 Bag/Bags

• Model No.: YRT325

In the 21st century, the diversified economic development of The Times also brings serious environmental pollution and energy tension. In order to effectively solve the environmental and energy problems, the exploration of renewable and green energy has always been one of the focuses of current research. The...

Cross Roller Bearing YRT200

• Brand: AUTO

• Packaging: Standard export packaging

• Supply Ability: 12000pcs/month

• Min. Order: 500 Bag/Bags

• Model No.: YRT200

In recent years, with the rapid development of economy and science and technology, wind power generator emerged as a new energy infrastructure, which not only effectively solved the problem of energy shortage in China, but also effectively controlled the situation of environmental pollution. As a super-large bearing,...

Cross Roller Bearing YRT50

• Brand: AUTO

• Packaging: Standard export packaging

• Supply Ability: 12000pcs/month

• Min. Order: 500 Bag/Bags

• Model No.: YRT50

However, the cross roller bearing in other aspects has the advantage that the YRT rotary table bearing can't be surpassed. Firstly, compared with the cross roller bearing and the YRT rotary table bearing in the same size segment, the cross roller bearing structure is relatively simple, through a row The cylindrical...

Cross Roller Bearing YRT80

• Brand: AUTO

• Packaging: Standard export packaging

• Supply Ability: 12000pcs/month

• Min. Order: 500 Bag/Bags

• Model No.: YRT80

As we all know, the overall quality of domestic high-precision processing equipment and industrial workers is still far from that of foreign countries. This is why the domestic production of YRT turntable bearings has been unstable, it is difficult to meet the main requirements of the user, which is bound to cause YRT...

6205 Deep Groove Ball Bearing

• Brand: AUTO

• Packaging: Standard export packaging

• Supply Ability: 12000pcs/month

• Min. Order: 500 Bag/Bags

• Model No.: 6205

Deep groove ball bearing features The deep groove ball bearing has a simple structure and is easy to achieve high manufacturing precision compared with other types, so it is convenient for mass production in a series; the manufacturing cost is also low, and the use is extremely common. The axial load capacity is...

6203 Deep Groove Ball Bearing

• Brand: AUTO

• Packaging: Standard export packaging

• Supply Ability: 12000pcs/month

• Min. Order: 500 Bag/Bags

• Model No.: 6203

Deep groove ball bearing basic definition Code number 6, it must be deep groove ball bearings, mainly used to withstand the load, but also load different paths at the same time, when the deep groove ball bearings only bear radial load, the contact is zero, when the deep groove ball bearing has For larger radial loads,...

(32021)Single row tapered roller bearing

• Brand: AUTO

• Supply Ability: 5000ps/month

• Min. Order: 500 Bag/Bags

• Model No.: 32021

With the development of science and technology, tapered roller bearings have played an increasingly important role in modern mechanical work. In practical applications, tapered roller bearings mainly bear radial load. How to improve the assembly quality and service life of tapered roller bearings has become the most...

(32015)Single row tapered roller bearing

• Brand: AUTO

• Supply Ability: 5000ps/month

• Min. Order: 500 Bag/Bags

• Model No.: 32015

Because of the special structure of the outer raceway of the thrust tapered roller bearing, it is difficult to produce and process the raceway. For this reason, the knot of the outer ring of thrust tapered roller bearing is analyzed, and the grinding processing method of the outer ring raceway and the easy problems in...

(32016)Single row tapered roller bearing

• Brand: AUTO

• Supply Ability: 5000ps/month

• Min. Order: 500 Bag/Bags

• Model No.: 32016

The large thrust tapered roller bearing is a kind of rolling mill bearing used in metallurgical industry, which requires high precision. Because of the particularity of its structure, it is difficult to process the production and processing, especially the processing of the outer ring raceway. In order to solve this...

(32022)Single row tapered roller bearing

• Brand: AUTO

• Supply Ability: 5000ps/month

• Min. Order: 500 Bag/Bags

• Model No.: 32022

In recent years, in the design of tapered roller bearings, the design of assembly chamfering has become a common concern and research problem. This is because the size design of tapered roller bearing ring assembly is suitable and the shape design is reasonable, which affects the assembly and service life of the whole...

Single row tapered roller bearing(32036)

• Brand: AUTO

• Supply Ability: 5000ps/month

• Min. Order: 500 Bag/Bags

• Model No.: 32036

With the continuous and stable development of our country's economy, China's industry has made unprecedented progress, and all kinds of industrial production technology have also made outstanding achievements. Bearing is a crucial part of industrial production. It is one of the main parts of all kinds of equipment....

32972 Single row tapered roller bearing

• Brand: AUTO

• Supply Ability: 5000ps/month

• Min. Order: 500 Bag/Bags

• Model No.: 32972

In recent years, in the design of taper roller bearing, the design of assembly chamfer Angle has become a common concern and research problem. This is because the size design and shape design of the chamfering Angle of the taper roller bearing ring assembly are reasonable, which greatly affects the assembly and...

CRB9016 Cross Roller Bearing

• Brand: AUTO

• Packaging: Standard export packaging

• Supply Ability: 12000pcs/month

• Min. Order: 500 Bag/Bags

• Model No.: CRB9016

Application of cross roller bearing in nc vertical lathe The advantages of cross roller bearings in the application of nc vertical lathe. Cross roller in the application of nc vertical lathe spindle gradually been recognized by people and roller with its special arrangement of cross section area is small, so save on...

(32007)Single row tapered roller bearing

• Brand: AUTO

• Supply Ability: 5000ps/month

• Min. Order: 500 Bag/Bags

• Model No.: 32007

In the process, the maximum deformation in heat treatment quenching from the stress deformation, warping deformation of the main effect of the large end of the bearing ring, the bearing in the production process, after thermal warpage ring large end up to 0.5mm, while surface in the grinding process to the end...

Single row tapered roller bearing(32005)

• Brand: AUTO

• Supply Ability: 5000ps/month

• Min. Order: 500 Bag/Bags

• Model No.: 32005

Bearing ring is light and narrow thin wall bearing, and the angle of inner and outer ring raceway and the angle of big end conical surface with large end face are larger. At present, the processing technology of tapered roller bearing has been basically mature in China. Bearing code:32005 d=25 D=47 B=15 C=11.5 T=15...

(32006)Single row tapered roller bearing

• Brand: AUTO

• Supply Ability: 5000ps/month

• Min. Order: 500 Bag/Bags

• Model No.: 32006

Bearing ring is light and narrow thin wall bearing, and the angle of inner and outer ring raceway and the angle of big end conical surface with large end face are larger. At present, the processing technology of tapered roller bearing has been basically mature in China. But because of the Thin-walled bearing ring...

32356 Single row tapered roller bearing

• Brand: AUTO

• Supply Ability: 5000ps/month

• Min. Order: 500 Bag/Bags

• Model No.: 32356

Taper roller bearings installation, you must exert equal pressure on the circumference of the ferrule end face, the ferrule pressed into, may not be used first-class tools such as direct impact on the taper roller bearings face, so as not to damage the bearings. In the case of a small amount of interference, the...

RB6013 Cross cylindrical roller bearing

• Brand: AUTO

• Supply Ability: 1000pcs/month

• Min. Order: 5 Bag/Bags

• Model No.: RB6013

Because the thrust ball is a kind of point contact bearing, the axial bearing capacity of the thrust ball is relatively low, which is mainly used in the rotary worktable of small or medium machine tools. In addition, the lubrication of the thrust ball is also difficult. The main working principle of thrust ball...

High speed angular contact ball bearing(71800C/71800AC)

• Brand: AUTO

• Packaging: Standard export packaging

• Supply Ability: 3000pcs/month

• Min. Order: 500 Bag/Bags

• Model No.: 71800C/71800AC

Back to back configuration, the rear code for DB What is the back configuration simply refers to the bearing outer ring width face wide, or a small end face of bearing inner ring installation small end. This is a kind of installation that we should use frequently, compared with the other 2 ways, it has the following...