During the use of the machine, some noise will be generated more or less, some are inevitable, but some noise must be solved immediately after the machine is generated, otherwise it will affect the operation of the machine, making the production unable to operate normally and causing unnecessary losses. . For example, in the work of Wuhan rv worm gear reducer, it should be stopped when the oil temperature rise exceeds 80 °C or the oil pool temperature exceeds 100 °C and abnormal noise is generated. Check the cause, the fault must be eliminated, and the lubricant should be replaced. In order to continue to operate.
Why does the rv reducer bearing part produce noise? Here are a few reasons:
1. Bearing cap or seal part friction
If the bearing is not properly installed, the bearing cap is not correct, or the bearing cap or the sealing part and the connecting part are worn out for a long time, the bearing of the reducer may have a high temperature or noise.
2, insufficient lubricant
If the lubrication oil level is insufficiently added or the gear unit cannot reach a reasonable height due to oil leakage, it may cause high temperature or noise of the bearing parts of the reducer.
3, bearing damage or wear
Damage to the cage of the bearing, wear or deformation of the inner and outer rings, wear or fall of the ball, etc. will make the reducer unable to work properly.
