Heavy Load Ball Bearings

NAFU201-8 Spherical Roller Bearing

• Brand: AUTO
• Packaging: Standard export packaging
• Supply Ability: 12000pcs/month
• Min. Order: 500 Bag/Bags

Due to its close set set of inner diameter of the same type of insert Spherical Roller Bearing units than covered wire, for example, with the top wire UC209 outer Spherical Roller Bearing inner diameter of 45 mm, instead of the cooperative use of shaft diameter of 45 mm, but if if insert ball bearing units with...

Contact Now

CRB12016 Cross Roller Bearing

• Brand: AUTO
• Packaging: Standard export packaging
• Supply Ability: 12000pcs/month
• Min. Order: 500 Bag/Bags

The application of cone cross roller in vertical lathe is very helpful to study the application of cross roller in nc vertical lathe. The motor drives a pair of bevel gears through a gearbox to drive the large gear ring and table around the spindle. Spindle bearing USES is the inner ring with taper hole 2 group of...

Contact Now

Taper Roller Bearing (32004)

• Brand: AUTO
• Supply Ability: 5000ps/month
• Min. Order: 500 Bag/Bags
• Certificate: ISO9001

Each tapered roller bearing consists of four separated components: the inner ring, the outer ring, the tapered roller (rolling element) and the cage. The conical angle allows the bearing to effectively carry both radial and axial composite loads. The steeper the angle of the outer ring, the greater the ability of the...

Contact Now

Double Row Cylindrical Roller Bearing (NN3092K/W33)

• Brand: AUTO
• Supply Ability: 5000ps/month
• Min. Order: 500 Bag/Bags
• Certificate: ISO9001

Double row cylindrical roller bearings are available in several designs with a cylindrical or tapered bore. It is particularly suitable for rigidly supported, but also supports short shafts, shafts that are axially displaced by thermal elongation, and machine attachments that require separate bearings for mounting and...

Contact Now

Deep Groove Ball Bearing (6003)

• Brand: AUTO
• Packaging: Standard export packaging
• Supply Ability: 12000pcs/month
• Min. Order: 500 Bag/Bags

Deep groove ball bearings are the most representative rolling bearings, which are widely used. Suitable for high or even very high speed operation, and very durable, without frequent maintenance. The bearing has small friction coefficient, high limit speed, simple structure, low manufacturing cost and high...

Contact Now

Taper Roller Bearing (30303)

• Brand: AUTO
• Supply Ability: 5000ps/month
• Min. Order: 500 Bag/Bags
• Certificate: ISO9001

Single row tapered roller bearings can withstand radial loads and axial loads in a single direction. When the bearing is subjected to a radial load, an axial component will be generated, so that another bearing that can withstand the axial force in the opposite direction is needed to balance. Tapered roller bearings...

Contact Now

Taper Roller Bearing (32904)

• Brand: AUTO
• Supply Ability: 5000ps/month
• Min. Order: 500 Bag/Bags
• Certificate: ISO9001

Tapered roller bearings are separate bearings, and the inner and outer rings of the bearing have tapered raceways.. It consists of two main detachable parts: the inner ring assembly and the outer ring. It is usually mounted on a reverse pair of bearings on the shaft. The cone angle allows our bearings to effectively...

Contact Now

Thrust cylindrical roller bearing (81205 TN)

• Brand: AUTO
• Supply Ability: 5000ps/month
• Min. Order: 500 Bag/Bags
• Certificate: ISO9001

A cylindrical roller thrust bearing is a particular type of roller bearing. Like other roller bearings, they permit rotation between parts, but they are designed to support a high axial load while doing this (parallel to the shaft). Higher speed applications require oil lubrication. Generally, they are composed of two...

Contact Now

Pillow Blocks Mounted Ball Bearing Units (UCPK209-26)

• Brand: AUTO
• Packaging: Standard export packaging
• Supply Ability: 12000pcs/month
• Min. Order: 500 Bag/Bags

The outer spherical ball bearing is a bearing unit that combines a rolling bearing and a bearing housing. Most of the outer spherical bearings are made of spherical surfaces and are mounted together with imported bearing housings with spherical inner holes. The structure is diverse, versatile and interchangeable....

Contact Now

Spherical roller bearing (23120/23120K)

• Brand: AUTO
• Supply Ability: 5000ps/month
• Min. Order: 500 Bag/Bags
• Certificate: ISO9001

Spherical roller bearings have double row rollers, the outer ring has one shared spherical raceway, and the inner ring has two raceways that are inclined at an angle relative to the bearing axis. This ingenious construction makes it self-aligning and therefore not susceptible to axial or bearing housing angle errors...

Contact Now

Thrust taper roller bearing (TTF12726658)

• Brand: AUTO
• Supply Ability: 5000ps/month
• Min. Order: 500 Bag/Bags
• Certificate: ISO9001

Thrust roller bearings are used to support axial and radial combined loads, but the radial load must not exceed 55% of the axial load. Compared with other thrust roller bearings, this type of bearing has lower friction factor, higher speed and has self-aligning performance. The assembly method of the thrust roller...

Contact Now

Sigle row Angular contact ball bearing 7008C

• Brand: Auto
• Packaging: wooden box
• Supply Ability: 1000000 sets/month
• Min. Order: 1000 Set/Sets

Product Description Structure Angular contact ball bearing Item No. 7008C Internal Diameter

Contact Now