Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Product Categories
(Total 12 Products for Ceramic Ball Bearings)
6014 Single Row Deep Groove Ball Bearing
Deep groove ball bearings are mainly used to bear pure radial load, but also can withstand both radial and axial load, when it is only subjected to pure radial load, the contact angle is zero. Deep groove ball bearings with large radial clearance, angular contact with the performance of the bearings can withstand...
6209 Single Row Deep Groove Ball Bearing
Thrust roller bearings are used for axial and radial combined loads subject to axial load, but radial loads must not exceed 55% of axial load. Compared with other thrust roller bearings, this type of bearing has a lower friction coefficient, higher rotational speed, and aligning performance. Thrust roller bearing...
High speed angular contact ball bearing(71904C/71904AC)
It can be used in these occasions with the demand of high rotation, low noise, and low oscillation. Bearing with seal together with steel cover of rubber seal usually filled with lubricant in advance ,the outside ring with stopping circle or flange ,these will not only be easier for axial orientation ,but also good...
High speed angular contact ball bearing(71922C/71922AC)
Found in the production practice in the long time, with locking and step bearing ring using the traditional processing technology of production, in the grinding process of slope after operation workers manual deburring, caused by increase the workload of operators, increase inspection workload, and the process of the...
High speed angular contact ball bearing(7023C/7023AC)
Angular contact bearing preload adjustment by grinding ring, change the bearing inner and outer ring spacer thickness difference to realize, consideration should be avoided in the new arrival of bearing ring needs to re grinding, not the original ring grinding processing, only in between the bearing and the bearing...
Single Row Deep Groove Ball Bearing (6021)
The purpose of bearing cleaning is to remove impurities in the bearing, improve cleanliness, facilitate the implementation of antirust technology, or remove the original oil seal on the bearing before washing. After inspection, the finished oil seal should be cleaned, fingerprints and two clean. Clean, wash oil,...
Single Row Deep Groove Ball Bearing (6222)
The main components of automatic measuring and measuring machine for deep groove ball bearings are automatic feeding device, axial loading device, spindle and driving device, speed sensor, bearing turnover device, measuring electric box and analysis system, cutting and sorting device, etc. Model: 6022 Brand: AUTO...
The waviness of bearing surface is an important feature of surface machining quality. It is generally considered that the corrugation of rolling surface is the main cause of bearing vibration. The influence of the ripple of bearing groove on the vibration and noise of bearing is widely used in frequency spectrum...
The radial stiffness of the deep groove ball bearing is related to the external load and contact deformation, which effectively solves the problem of the stiffness of the deep groove ball bearings. The first requirement is to bear the radial load, the distribution of bearing contact force and the corresponding stress...
32960 Single row tapered roller bearing
When the interference is larger, the oil bath heating or sensor heating method can be used to install the heating temperature range of 80 ℃ -100 ℃, the maximum can not exceed 120 ℃. At the same time, the use of nuts or other appropriate method of fastening the bearing to prevent the taper roller bearings cooling...
32060 Single row tapered roller bearing
After installation, tapered roller bearing should be subjected to rotation test. First, it should be used on the rotating shaft or tapered roller bearing box. If there is no abnormality, tapered roller bearing should be powered at no-load and low-speed. Then, the rotation speed and load should be gradually increased...
30260 Single row tapered roller bearing
Third, the use of tapered roller bearing the environment: According to the use of parts and conditions of use and environmental conditions to choose size, precision, with appropriate tapered roller bearing is to ensure the bearing life and reliability of the premise. 1, the use of parts: tapered roller bearings for...
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Send Inquiry
Mr. Derrick
Email:
Send Inquiry Tel:86-0379-65188961
Fax:86-0379-65188961
Mobile Phone:+8613721655534
Email:
Address:No.1 Nan Chang Road, Luoyang, Henan
Related Products List
Mobile Site
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.